|
PROJECT EXPERIENCE
CURRENT OR RECENT PROJECTS
Carolina Power & Light
ICTG
Project
Rowan County, NC
This project includes a
500/23 kV substation with a 1000 MVA, 500/230 kV transformer bank,
230 kV ring bus, two 230 kV capacitors banks and a bundled 1590
kc-mil 230 kV transmission line (ultimately two 230 kV lines). The
project also includes a 230 kV plant switchyard for three 200 MW gas
fired turbine generators with provisions to expand to seven 200 MW
generators.
Monroe Power Company
ICTG Project
Monroe,
GA
UTEC provided design, engineering, and construction
observation for a 230 kV switchyard and associated transmission
lines for a 180 MW gas fired turbine generator. The project included
a 230/13.8 kV, 217 MVA unit connected step-up transformer,
generator iso-phase bus, a 25 MVA 230/4.16 kV auxiliary
transformer, three 230 kV OCBs, rigid bus low profile substation
design, two 230 kV transmission lines and associated protection and
control equipment.
The project also included revenue
metering, telemetry, and alarming using a PLC system accessed over
an intranet using TCP/IP.
The project was completed and
ready for synchronization seven months after award of the
engineering contract
Design of a new 100 kV substation with two 15/20/25 MVA
transformers, five 15 kV circuit breakers, circuits switches, low
profile steel structures and related protection and control for the
Commissioners of Public Works in Greenwood, SC.
Addition of 15/20/25 MVA transformer and one 23 kV circuit
breaker to CP&L’s Florence, SC Mt. Hope 115 kV substation.
Addition of 15/20/25 MVA transformer and three 23 kV circuit
breakers to CP&L’s Wrightsville Beach, NC 115 kV substation.
Addition of 15/20/25 MVA transformer and one 23 kV circuit
breaker to CP&L’s Wendell, NC 230 kV substation. |
